GW3-TRBO Update Notes
New Features in Update 27
- Each module has individual icons which appear in the taskbar
- Radio Check ACKs now archived by Archiver Module
- GW3-TRBO will now monitor and report diagnostic alarms from eligible repeaters using the 1.6 firmware
- A new System Diagnostics report is now available
- RDAC alarms now generate an immediate diagnostic
Issues Resolved in Update 27
Activity
- Blank packets should no longer appear
Channel
- Private Data calls no longer time out prematurely
- Busies: fixed issue where an ATB could not be generated when another TRBO connection was active
- Site Options: Channel Width: text field for Channel Width now functions as intended
- Channel: no longer displays large negative number for the value on Time Tick Marker on an End of Call packet
GenSPOut
- Outputs: Call Info / Change Info removed from Online Help
- Interfaces: Updating settings no longer takes as long as the longest active timed output
Halcyon
- Arc_Inhibits table now adds a new line for Inhibits instead of updating an existing item
Radio Commands
- Radio Commands issued in SAC now come through RC in numeric format instead of I7
- Call Alerts may now be issued in RC even when the database is down
- Talkgroups now appear in Database Snapshot
Reports
- Online Help now includes two additional reports
- Radio Discovery: Call Alerts are now properly added to the database
- Call Activity: Emergency Option now filters based on selected criteria
- Channel Usage: Frequency column now expands so it appears correctly on printed report
- Radio PTTs: Location and Agency now appear in separate columns
- Radio Activity Detail: page width has been adjusted so entire report will print on single sheet
SysLog
- A link up notification appears after losing power
TRBO
- The 1.6-firmware repeater in Capacity Plus mode will not accept pre-2.0.5.27 version of GW3-TRBO. To establish a connection to a repeater running in Capacity Plus mode and using the 1.6 firmware (R01.06.xx), it is necessary to upgrade to GW3-TRBO v.2.0.5.27. Versions of GW3-TRBO prior to Update 27 work fine with 1.6-firmware repeaters in IP Site Connect mode.
- Blank packets from Data Revert channels are no longer received in Capacity Plus mode
- Fixed issue where radio sourced Request Radio Affiliation packets were showing reversed ID and Requester ID values
- Correct Radio IDs are displayed when using RF control station for monitoring
- System Configuration: Radio ID filter has been enabled in the demo version
- System Configuration: now longer allows for an active RF connection with an IPSC connection
